Product ID:3502, COMPLIANT BAKOTE TINT BASE ALKYD ENAM
MSDS Date:07/20/1990
FSC:8010
NIIN:00N032922
MSDS Number: BNPKN

TRIANGLE COATINGS INC

1930 FAIRWAY DRIVE
SAN LEANDRO, CA 94577-5631
US

Emergency Phone: 415-284-9031

Info Phone: 415-895-8000

Preparer: J.T.K.

Cage: 0GB20

TRIANGLE COATINGS INC

SAN LEANDRO, CA 94577-5631 US

Telephone: 800-895-8000

Cage: 0GB20

2 @ 20C

CAS: 64741-41-9

Fraction By Weight: 25%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

2.7 @ 20C

CAS: 64742-95-6

Fraction By Weight: 10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOS CAN LEAD TO CNS
DEPRESS PRDCING SUCH EFTS AS HDCH, DIZZ, NAUSEA & LOSS OF
CONSCIOUSNESS. EYE:SHORT TERM CONT MAY RSLT IN SLIGHT IRRIT.
PRLNGD/RPTD CONT MAY BE MORE IRRITATING. SKIN:PR LNGD/RPTD LIQ CONT
CAN CAUSE DEFATTING & DRYING OF SKIN WHICH MAY RLST IN IRRIT &
DERM. TESTS SHOW (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:OVEREXPOSURE MAY CAUSE BLOOD DISORDERS
& NEUROLOGIC DISORDERS. REPORTS HAVE ASSOCIATED REPEATED/ PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN & NERVOUS
SYSTEM DAMAGE. INT ENTIONAL MISUSE OF THIS PRODUCT MAY BE HARMFUL
OR FATAL.
Medical Cond Aggravated by Exposure:NONE.

First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINS WHILE HOLDING EYELIDS
OPEN. GET MD. SKIN:WASH W/SOAP & WATER. REMOVE CONTAMD CLTHG/SHOES;
DO NOT REUSE UNTIL CLEANED. IF PERSISTENT IRRIT OCCURS, GET MD.
INHAL:R EMOVE VICTIM TO FRESH AIR & PROVIDE O2 IF BRTHG IS DFCLT.
GIVE ARTF RESP IF NOT BRTHG. GET MD. INGEST:IF SWALLOWED, SEEK EMER
MED ATTN. DO NOT GIVE ANTYING BY MOUTH TO AN UNCON PERS. IF (SUPP
DATA)

Flash Point Method:SCC
Flash Point:108F,42C
Lower Limits:0.5%
Upper Limits:6.0%
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL & CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. EVAC HAZ AREA OF UNPROT PERS. COOL FIRE EXPOSED CONTRS W/ WATER.
AVOID SPREADING BURNING LIQ (SUPP DATA)
Unusual Fire/Explosion Hazard:THIS MATERIAL IS FLAMMABLE & MAY BE
IGNITED BY HEAT, SPARKS, FLAME OR STATIC ELECTRICITY.

Spill Release Procedures:STAY UPWIND & AWAY FROM SPILL. KEEP ALL
SOURCES OF IGNITION & HOT METAL SURFACES AWAY FROM SPILL. IF SPILL
IS INDOORS, VENTILATE AREA OF SPILL. IF LARGE SPILL, CALL SPILL
RESPONSE TEAM. NOTIFY APPROPR IATE STATE/LOCAL AGENCIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM STRONG OXIDIZING
AGENTS IN A COOL, DRY PLACE W/ADEQ EXPLOS-PROOF VENT. KEEP AWAY
FROM HEAT, SPARKS & OPEN FLAME.
Other Precautions:KEEP CONTAINER TIGHTLY CLOSED. GROUND EQUIPMENT TO
PREVENT ACCUMULATION OF STATIC CHARGE. IF POURING OR TRANSFERRING
MATERIAL, CONTAINER MUST BE BONDED & GROUNDED.

Respiratory Protection:DEPENDING ON THE NATURE & CONCENTRATION OF THE
AIRBORNE MATERIALS, USE A NIOSH/MSHA APPROVED RESPIRATOR OR GAS
MASK W/ APPROPRIATE CARTRIDGES & CANISTERS OR SUPPLIED AIR
EQUIPMENT.
Ventilation:USE EXPLOS-PROOF VENT AS REQD TO CONTROL VAP CONC. TO
MAINTAIN AIRBORNE CONC BELOW ESTABLISHED EXPOS LIMITS, (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING AS REQUIRED TO
PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH W/SOAP & WATER BEFORE EATING, DRINKING,
SMOKING OR USING TOILET FACILITIES. LAUNDER CONTAMD CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
FIRE FIGHT PROC:W/WATER USED FOR COOLING PURPOSE. FIRST AID
PROC:SWALLOWED, DO NOT INDUCE VOMITING! IF SWALLOWED, INDUCE
VOMITING BY GIVING SYRUP OF IPECAC-ONE OUNCE FOLLOWED BY EIGHT
OUNCES OF WATER. VENT:ADDITIONAL VENTILATION OR EXHAUSTSYSTEMS MAY
BE REQUIRED.

HCC:F4
Boiling Pt:B.P. Text:>313F,>156C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:48.1

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENT. AVOID CONTACT W/ALKALIES,
AQUEOUS ACIDS, AMINES & ACIDIC ALCOHOLS.
Stability Condition to Avoid:AVOID HEAT, SPARKS & OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CO &/OR CO2.

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE W/LOCAL,
COUNTY, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.